38%22 On Lower Sections 46%22 Generator

Pie chart displaying segments for 40%,

12%,

and 48%.

The image presents a technical drawing featuring a fillet with a radius of 3/4 inches.

It includes precise measurements for various dimensions,

including a height of 3.

5 inches and width of 7 inches.

The fillet is illustrated with a 37-degree angle,

contributing to the drawing's overall design.

The drawing is detailed,

ensuring accuracy for engineering purposes.

This schematic would be valuable in manufacturing or architectural contexts.

This technical drawing represents a rectangular section with notches.

The front view shows a height of 30 units and a width of 50 units,

highlighting 10x10 notches on each side.

The top view maintains the same width of 50 units and a depth that includes the notches.

The side view reflects a height of 30 units and a depth of 50 units,

showcasing the notches as protrusions.

This illustration can be utilized in engineering and architectural contexts for precise representation of specifications.

Beige rectangular board displayed with measurement markings.

Dimensions indicated clearly.

Includes a small tool on the right for reference.

Technical illustration drawing of a holder designed for four 250 ml coffee cups.

Dimensions provided for length of 28.

0 and width of 12.

0 while height is 20.

05.

Frame supports two cups on each side,

with detailed measurements shown.

This image is a technical drawing of the Terror Elevator ride.

It includes detailed front,

side,

and top views with accurate dimensions.

The front view features a centered bi-fold door at a height of 2100mm.

The side view illustrates a ramp leading to a raised floor that is 500mm above the ground.

The top view shows a cabin that measures 3000mm x 3000mm within a 3500mm outer cube,

highlighting the door location and wall positioning.

Dimensions are clearly marked for reference,

ensuring thorough understanding of the structure.

This image shows a detailed orthographic scale drawing of a five-piece furniture set.

Each piece features specific dimensions,

including height,

width,

and thickness.

Table height is 74 cm,

width is 120 cm,

thickness 6 cm,

with rounded corners of 4-5 cm.

Second piece: 67 cm height,

106 cm width,

thickness 5 cm,

3-4 cm corners.

Third piece: 61 cm height,

94 cm width,

5 cm thickness,

2.

5-3.

5 cm corners.

Fourth piece: 55 cm height,

82 cm width,

4.

5 cm thickness,

2-3 cm corners.

Smallest piece: 49.

5 cm height,

71 cm width,

4 cm thickness,

1.

5-2.

5 cm corners.

The drawing is clear and precise,

showing all dimensions.

Design of a tunnel featuring four arches with varying heights.

The first arch is 2.

5m tall.

The second arch is 3.

5m tall.

The third arch is 3m tall and slanted.

The fourth arch resembles a dome and is closed.

A painting is displayed at the end of the tunnel.

A detailed illustration of a wooden shelf with specified dimensions and joinery details.

The design features eight uprights with varying heights,

mortise and tenon joints,

horizontal frame pieces,

and adjustable shelves.

The details include dimensions for each component and joinery methods for assembly.

Technical drawing of a rectangular section with notches.

Height measures 30 units.

Width measures 50 units.

Features 10x10 notches on either side.

Top view shows width of 50 units.

Side view emphasizes height of 30 units and depth of 50 units.

Suitable for engineering and architectural projects.

3D model converted into a sectional drawing.

Varied line weights used to show depth.

Thicker lines denote closer objects.

With precise line work,

details highlighted on tables and cylindrical sections.

Walls and structural elements defined with hatch patterns.

Clear separation between different planes enhances depth and spatial arrangement.

Drawing shows rectangular section with notches,

front view height of 30 units and width of 50 units,

notches on each side.

Top view width of 50 units,

depth with notches.

Side view height of 30 units and depth of 50 units,

notches as protrusions.

Suitable for engineering and architectural contexts.

A woman experiencing back pain while working at her desk in an office setting,

holding her lower back and smiling despite the discomfort.

Draw three horizontal rectangles for Top View,

Front View,

and Right Side View.

Arrange them.

Front View is centered in the middle.

Top View is directly above the Front View.

RHS View is to the right of the Front View.

Individual analyzing stock charts on two monitors.

Room is dimly lit.

Strong focus on screens displaying financial data.

Technical drawing of a dual-sided e-paper departure board.

E-paper panel is 13 inches integrated into a housing.

Housing dimensions are 42 cm x 40 cm x 10 cm.

Landscape format with two M10 drilling holes on the left side.

Drawing shows front perspective with size annotations.

Thick Arabic calligraphy representing Surah Ghafir,

highlighted with ornamental design and a decorative frame.

Emphasis on the beauty of the script and its spiritual significance.

Visitor in art gallery sits on the floor looking at a painting.

The angles of elevation to the top and bottom of the painting are given for calculations.

Pie chart with colorful segments.

One segment prominently displays 82%.

Convert this 3D model into a sectional drawing.

Use varied line weights to show depth,

with thicker lines for objects closer to the viewer and thinner lines for those further away.

Highlight the details of the tables and cylindrical sections with precise line work.

Ensure the walls and structural elements are clearly defined with appropriate hatch patterns.

Maintain clear separation between different planes to enhance the sense of depth and spatial arrangement.

The image depicts a technical drawing of a bevel gear.

The gear is represented in outline form.

The gear design features a 30-degree angle for precise engineering applications.

A chair shown in different views.

The design is simplified into a single outline.

Representation suitable for AutoCAD in dwg format.

Create a detailed technical drawing of a mechanical component showing a base plate with rounded ends.

Include a cylindrical structure with a diameter of 60 mm and a height of 60 mm on one end.

Add a slot in the center of the base connecting the cylinder to a rectangular block.

Label dimensions clearly.

This technical drawing features a rectangular section detailed with notches.

The front view illustrates a height of 30 units and a width of 50 units,

clearly depicting 10x10 notches on either side.

The top view shows the same width of 50 units and a depth that accounts for the notches.

Additionally,

the side view captures a height of 30 units and a depth of 50 units,

emphasizing the notches as protruding features.

This illustration serves as a precise representation for engineering and architectural projects,

beneficial for ensuring accuracy in specifications.

A pistol cartridge has the width of .

40 Smith & Wesson.

It has the length of .

45 Long Colt.

The cartridge is displayed on a wooden surface.

The image displays metallic colors.